ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 2520-00-847-0513, 2520008470513
PROPELLER SHAFT WITH UNIVERSAL J

Federal Supply Classification
FSC 2520 - Vehicular Power Transmission Components
National Item Identification Number
NIIN 008470513
Codification Country
United States
Item Name Code
INC 52091
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 2520-00-847-0513
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 2520-00-847-0513


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 2520-00-847-0513

National Stock Number (NSN) 2520-00-847-0513, or NIIN 008470513, (propeller shaft with universal j) was assigned December 30, 1966 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on May 02, 2006, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 52091. [A VEHICULAR ITEM WITH A UNIVERSAL JOINT ON ONE OR BOTH ENDS. FOR ITEMS WITH ONE UNIVERSAL JOINT, THE OPPOSITE END MAY HAVE A YOKE, A YOKE WITH A SPIDER, OR A SHAFT. FOR ITEMS WITHOUT A UNIVERSAL JOINT SEE PROPELLER SHAFT (AS MODIFIED).]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 2520008470513 contains an unknown precious metal.

This NSN is associated to Schedule B 8483909500: parts, nesoi, of bearing housings & plain shaft bearings, housed bearings, clutches, universal joints, flywheels and transmission shafts. The Schedule B End Use is listed as industrial machines, other. NAICS classification category 333613: mechanical power transmission equipment manufacturing.

This information was last updated on .


Technical Characteristics

SPECIAL FEATURES
(FEAT) 90 DEG FROM KEYWAY AND 0.488 IN. FROM HUB END
PART NAME ASSIGNED BY CONTROLLING AGENCY
(CXCY) PROPELLER SHAFT WITH UNIVERSAL JOINT
SHAFT DIAMETER
(ABWV) 0.875 INCHES NOMINAL
SECURING HOLE LOCATION
(BTBN) 90 DEG FROM KEYWAY AND 0.488 IN. FROM HUB END
SECURING HOLE THREAD SIZE DESIGNATOR
(BTBQ) 5/16-18
OUTSIDE DIAMETER
(ABKV) 1.400 INCHES NOMINAL
OVERALL WIDTH
(ABMK) 2.795 INCHES NOMINAL
MOUNTING HOLE DIAMETER
(ABTB) 0.318 NOMINAL INCHES
SECOND CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES
(ABUR) 2.105 INCHES NOMINAL
DISTANCE FROM CENTERLINE TO KEYING FACILITY
(BTKH) 0.475 INCHES NOMINAL
OUTER PERIPHERY MACHINED SURFACE FINISH
(BSYF) NOT INCLUDED
SCREW THREAD SERIES DESIGNATOR
(AJYP) UNC
UNIVERSAL JOINT CONNECTION END TYPE
(BTCC) HUB
FIRST CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES
(ABUQ) 1.765 INCHES NOMINAL
SHAFT LENGTH
(ABXF) 6.750 INCHES NOMINAL
SPLIT HUB FEATURE
(BSYG) NOT INCLUDED
UNABLE TO DECODE
(BTBX) UNABLE TO DECODE
LENGTH FROM UNIVERSAL JOINT SPIDER CENTERLINE TO FLANGE OUTER FACE
(AMBL) 1.201 INCHES NOMINAL
HUB SECURING HOLE
(BTBM) INCLUDED
LENGTH FROM UNIVERSAL JOINT SPIDER CENTERLINE TO HUB END
(AMBA) 1.772 INCHES NOMINAL
UNABLE TO DECODE
(ANTP) UNABLE TO DECODE
UNIVERSAL JOINT STYLE
(BTBT) C7
MAJOR DIAMETER
(AAZR) 0.750 NOMINAL INCHES
UNABLE TO DECODE
(AEDX) UNABLE TO DECODE
OVERALL HEIGHT
(ABKW) 2.480 INCHES NOMINAL
SECURING HOLE QUANTITY
(AHYF) 1
HUB BORE
(BSYL) INCLUDED
UNIVERSAL JOINT CONNECTION END TYPE
(BTCC) FLANGE
FLANGE STYLE
(AGMD) E2
PILOT DIAMETER
(AAVL) 2.250 INCHES NOMINAL
KEYING FACILITY QUANTITY
(BSGH) 1
SAFETY CLUTCH
(BTBW) NOT INCLUDED
WIDTH
(ABGL) 0.182 INCHES NOMINAL

Manufacturer Part Numbers


Related Inventory



 
Top