ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 2530-00-248-0135, 2530002480135
CYLINDER ASSEMBLY,HYDRAULIC BRAK

Federal Supply Classification
FSC 2530 - Vehicular Brake, Steering, Axle, Wheel, and Track Components
National Item Identification Number
NIIN 002480135
Codification Country
United States
Item Name Code
INC 10862
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 2530-00-248-0135
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 2530-00-248-0135


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 2530-00-248-0135

National Stock Number (NSN) 2530-00-248-0135, or NIIN 002480135, (cylinder assembly,hydraulic brak) was assigned February 19, 1969 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 26, 2008, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 10862. [A DEVICE CONSISTING OF A CYLINDER, HYDRAULIC BRAKE, WHEEL WITH A PISTON(S) AND OTHER COMPONENT PARTS WHICH IS MOUNTED TO THE BACK PLATE OF A WHEEL. IT USES THE FLOW AND PRESSURE OF A FLUID TO CREATE THE LINEAR MOTION REQUIRED TO OPERATE THE BRAKE SHOES OF A HYDRAULIC BRAKE SYSTEM.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 2530002480135 contains an unknown precious metal.

This NSN is associated to Schedule B 8708300050: brakes and servo-brakes and parts, of motor vehicles of headings 8701 to 8705. The Schedule B End Use is listed as other parts and accessories of vehicles. NAICS classification category 336340: motor vehicle brake system manufacturing.

This information was last updated on .


Technical Characteristics

BLEEDING FEATURE QUANTITY
(CLND) 1
BODY MATERIAL
(AAFZ) STEEL
BORE DIAMETER
(ABXV) 1.438 INCHES NOMINAL
BORE TYPE
(ASBP) STRAIGHT
CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS
(CLMR) 2.125 INCHES NOMINAL
DESIGN CHARACTERISTICS
(CKSD) DOUBLE ACTING SINGLE CYLINDER
OVERALL HEIGHT
(ABKW) 2.688 INCHES NOMINAL
OVERALL WIDTH
(ABMK) 3.500 INCHES NOMINAL
MOUNTING FACILITY THREAD DIAMETER
(CDTF) 0.375 INCHES NOMINAL
MOUNTING FACILITY THREAD CLASS
(AKBM) 2B
MOUNTING FACILITY THREAD DIRECTION
(AKBN) RIGHT-HAND
MOUNTING FACILITY THREAD LENGTH
(CLMN) 0.500 INCHES NOMINAL
MOUNTING FACILITY THREAD QUANTITY PER INCH
(CDTG) 16
MOUNTING FACILITY THREAD SERIES DESIGNATOR
(CDTD) UNF
MOUNTING PROVISION ARRANGEMENT STYLE
(BBBW) TWO HOLE
MOUNTING PROVISION
(ABDR) THREADED MOUNTING HOLES
PORT LOCATION AND QUANTITY
(CLMS) 1 CENTER SECTION
PORT STYLE
(CLMT) INVERTED FLARE
PORT THREAD CLASS
(CLNB) 2B
PORT THREAD DIAMETER
(CLMX) 0.438 INCHES NOMINAL
PORT THREAD QUANTITY PER INCH
(CLMY) 20
PORT THREAD SERIES DESIGNATOR
(CLMW) UNF
SEAT ANGLE IN DEG
(AJFY) 37.0

Manufacturer Part Numbers


Related Inventory

FD20595
2530002480135
Condition NS
CYLINDER
Readily Available


 
Top