National Stock Number
5305-01-541-2119
National Stock Number (NSN) 5305-01-541-2119, or NIIN 015412119, (screw,shoulder) was assigned June 20, 2006 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.
There are 16 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.
This part number has not been procured by the US Government in over 5 years.
Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 21, 2006, this NSN's acquisition method was noted as: Acquire only from the prime contractor although the engineering data identifies the Commercial and Government Entity Code (CAGE) and part number of a source other than the prime contractor. The design of this part is unstable. Engineering, manufacturing, or performance characteristics indicate that the required design objectives have not been achieved. Major changes are contemplated because the part has a low process yield or has demonstrated marginal performance during tests or service use. These changes will render the present part obsolete and unusable in its present configuration. Limited acquisition from the present source is anticipated pending configuration changes. Valid AMCs: 1, 2, 3, 4 and 5.
This NSN is assigned to Item Name Code (INC) 22846. [AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, NO 0 (0.060 IN.) (1.5 MM) OR LARGER. IT HAS A ROUND UNTHREADED NECK OR SHANK ALL OR PART OF WHICH IS OF GREATER DIAMETER THAN THE THREADED PORTION. THE HEAD IS DESIGNED TO BE DRIVEN WITH EITHER A WRENCH OR AN INSERTED DRIVER OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) NOMINAL DIAMETER. NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST BE DESIGNED FOR ANY TYPE OF INSERTED DRIVER, BUT MAY ALSO PROVIDE FOR EXTERNAL WRENCHING OF THE HEAD. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS WHICH ARE BOTH SHOULDERED AND HAVE AN EXTERNALLY RELIEVED BODY, USE SCREW, EXTERNALLY RELIEVED BODY. FOR ITEMS WITH A NO. 10 (0.190 IN.) (5 MM) OR LARGER THREAD DIAMETER WITHOUT AN INSERTED DRIVER HEAD, USE BOLT, SHOULDER. EXCLUDES:BOLT, INTERNAL WRENCHING AND SCREW, CAP, SOCKET HEAD.]. The item is a non-aviation Critical Safety Item (CSI) whose failure will result in serious damage to equipment or serious injury or death to personnel. There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials. NSN 5305015412119 does not contain precious metals.
This information was last updated on Nov 01, 2024.