ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-083-4512, 5340000834512
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 000834512
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-083-4512
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-083-4512


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-083-4512

National Stock Number (NSN) 5340-00-083-4512, or NIIN 000834512, (bracket,double angle) was assigned January 1, 1963 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340000834512 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

FABRICATION METHOD (NON-CORE)
(AARN) FORMED
CENTER SECTION WIDTH
(AHQA) 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM
CENTER SECTION HEIGHT
(AHPZ) 0.432 INCHES MINIMUM AND 0.452 INCHES MAXIMUM
CENTER SECTION THICKNESS
(AHQB) 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
FABRICATION METHOD
(AARN) FORMED
FIRST LEG ANGLE
(CSSQ) 81.30 DEGREES NOMINAL
FIRST LEG END RADIUS
(AJFP) 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) ONE HOLE
FIRST LEG HOLE DIAMETER
(AHLK) 0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
FIRST LEG LENGTH
(ADLK) 0.640 INCHES MINIMUM AND 0.660 INCHES MAXIMUM
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.250 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.280 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM
FIRST LEG STYLE
(AJZU) END RADIUS
FIRST LEG THICKNESS
(AHPW) 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 410
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.280 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.280 INCHES NOMINAL
SECOND LEG END RADIUS
(AJFQ) 0.280 INCHES NOMINAL
SECOND LEG ANGLE
(CSSR) 100.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG STYLE
(AKBU) END RADIUS
SECOND LEG THICKNESS
(AHPX) 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) ONE HOLE
SECOND LEG HOLE DIAMETER
(AHLN) 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
SECOND LEG LENGTH
(ADLL) 1.600 INCHES MINIMUM AND 1.620 INCHES MAXIMUM
SECOND LEG WIDTH
(AHLF) 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE

Manufacturer Part Numbers


Related Inventory

34XY56
HP243-1563
Condition NE
Screw Machine D
Readily Available


 
Top