ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5905-00-812-1469, 5905008121469
RESISTOR,VARIABLE,WIRE WOUND,NON

Federal Supply Classification
FSC 5905 - Resistors
National Item Identification Number
NIIN 008121469
Codification Country
United States
Item Name Code
INC 37406
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(N) There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5905-00-812-1469
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5905-00-812-1469


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5905-00-812-1469

National Stock Number (NSN) 5905-00-812-1469, or NIIN 008121469, (resistor,variable,wire wound,non) was assigned January 1, 1962 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 02, 2006, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The cost to the Government to breakout this part and acquire it competitively has been determined to exceed the projected savings over the life span of the part. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 37406. [A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, AND THE LIKE, SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES:RESISTOR (1), VARIABLE, NONWIRE WOUND; NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials. NSN 5905008121469 contains an unknown precious metal.

This NSN is associated to Schedule B 8533390080: wirewound variable resistors, nesoi. The Schedule B End Use is listed as electric apparatus.

This information was last updated on .


Technical Characteristics

III OVERALL WIDTH
(ABMK) 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
III OVERALL HEIGHT
(ABKW) 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
STANDARD TAPER CURVE PER SECTION
(CSDL) A SINGLE SECTION
III OVERALL LENGTH
(ABHP) 1.300 INCHES MINIMUM AND 1.340 INCHES MAXIMUM
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS
(CRFJ) -50.0/+50.0 SINGLE SECTION
UNABLE TO DECODE
(CSDL) UNABLE TO DECODE
ELECTRICAL RESISTANCE PER SECTION
(CQCC) 30.0 KILOHMS SINGLE SECTION
ACTUATOR TYPE
(AEFD) SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER
(CSDH) 70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER
(CQGN) 175.0 SINGLE SECTION
BODY HEIGHT
(ADAU) 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
BODY LENGTH
(ADAQ) 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
BODY WIDTH
(ADAT) 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
BODY STYLE
(AAQL) RECTANGULAR W/MOUNTING HOLES/SLOTS
FEATURES PROVIDED
(CBBL) NONMETALLIC SHAFT
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS
(AGTP) 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM
OVERALL HEIGHT
(ABKW) 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
OVERALL LENGTH
(ABHP) 1.300 INCHES MINIMUM AND 1.340 INCHES MAXIMUM
OVERALL WIDTH
(ABMK) 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
MAXIMUM STARTING TORQUE
(AEFK) 5.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY
(AKPV) 2
MOUNTING HOLE DIAMETER
(ABTB) 0.088 INCHES MINIMUM
MOUNTING METHOD
(AXGY) UNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS
(CRGD) 1.0 FREE AIR SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT
(CRSS) -5.0 TO 5.0 SINGLE SECTION
RELIABILITY INDICATOR
(AARG) NOT ESTABLISHED
SECTION QUANTITY
(AAPN) 1
SHAFT DIAMETER
(ABWV) 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
SHAFT LENGTH
(ABXF) 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
SHAFT STYLE
(AEDX) ROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS
(CRFJ) -50.0 TO 50.0 SINGLE SECTION
TERMINAL LOCATION
(APXH) REAR END
TERMINAL TYPE AND QUANTITY
(TTQY) 3 TAB, SOLDER LUG
RESISTANCE TOLERANCE PER SECTION IN PERCENT
(CRSS) -5.0/+5.0 SINGLE SECTION

Manufacturer Part Numbers


Related Inventory



 
Top