ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 9390-01-317-5863, 9390013175863
CORK SHEET

Federal Supply Classification
FSC 9390 - Miscellaneous Fabricated Nonmetallic Materials
National Item Identification Number
NIIN 013175863
Codification Country
United States
Item Name Code
INC 03823
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 9390-01-317-5863
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 9390-01-317-5863


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 9390-01-317-5863

National Stock Number (NSN) 9390-01-317-5863, or NIIN 013175863, (cork sheet) was assigned April 1, 1990 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 4 manufacturer part numbers associated with this NSN. 2 of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Mar 02, 2006, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 03823. [A SHEET OF NATURAL BARK OR A SHEET OF ROLLED OR COMPPRESSED GRANULATED CORK HAVING A CORK GUM, GELATIN, OR PHENOLIC RESIN BINDER. IT MAY INCLUDE A FABRIC OR OTHER INTERLINER. CROSS-SECTIONAL SIZES ARE LIMITED TO THICKNESSES OF 1 INCH (25.4 MM) OR LESS AND WIDTHS OF OVER 6 INCHES (152.4 MM). SEE ALSO CORK AND RUBBER SHEET; CORK STRIP; AND CORK AND RUBBER STRIP. EXCLUDES:INSULATION BLANKET, THERMAL; AND INSULATION BOARD, THERMAL.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 9390013175863 does not contain precious metals.

This NSN is associated to Schedule B 4502000000: natural cork, debacked or roughly squared, or rectangular (inc square) blocks, plates, sheets or strip (inc sharp-edged blanks for corks or stoppers). The Schedule B End Use is listed as other industrial supplies. NAICS classification category 321999: all other miscellaneous wood product manufacturing.

This information was last updated on .


Technical Characteristics

UNABLE TO DECODE
(MATL) UNABLE TO DECODE
LENGTH
(ABRY) 50.000 INCHES NOMINAL
MATERIAL
(MATT) CORK
MINIMUM TENSILE STRENGTH
(AASH) 250 POUNDS PER SQUARE INCH
SPECIAL FEATURES
(FEAT) BINDER MATERIAL,THERMOSETTING MODIFIED PHENOLIC RESIN WITH A POLY PLASTICIZER
WIDTH
(ABGL) 28.000 INCHES NOMINAL
THICKNESS
(ABNM) 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
MATERIAL
(MATL) CORK


Related Inventory

NAS1303-4
Readily Available
NAS1303-4D
Readily Available
NAS1303-4H
Readily Available
NAS1303-42
Readily Available
NAS1303-46
Readily Available
NAS1303-48DH
Readily Available
NAS1303-43DH
Readily Available
7671CNAS1303-4H
5306-00-813-2792
Condition NE
BOLT
Readily Available
NAS1303-48D
5306-00-223-3970
Bolt
Readily Available
NAS1303-48D
Readily Available
NAS1303-4H
5306008132792
Condition NS
BOLT
Readily Available
NAS1303-40D
Readily Available
NAS1303-42D
5306009246217
Condition NS
BOLT
Readily Available
7671CNAS1303-4
Condition NE
BOLT
Readily Available
5306-00-470-1567
NAS1303-42
Condition NS
BOLT
Readily Available
NAS1303-48
Readily Available
NAS1303-40
5306009289768
Condition NS
BOLT
Readily Available
7671CNAS1303-40H
Condition NE
BOLT
Readily Available
NAS1303-4
NAS6603-4
Condition FN
BOLT,HEX HEAD,C
Readily Available
NAS1303-40DH
Condition FN
BOLT, TENSION,
Readily Available
NAS1303-4H
NAS6603H4
Condition FN
BOLT,HEX HEAD,C
Readily Available
S1303451
5315011992413
Condition NS
PIN
Readily Available
S1303450
5315011962411
Condition NS
PIN
Readily Available


 
Top