ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-482-6072, 5340004826072
HINGE,BUTT

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 004826072
Codification Country
United States
Item Name Code
INC 22894
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: We have 2 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-482-6072
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-482-6072


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-482-6072

National Stock Number (NSN) 5340-00-482-6072, or NIIN 004826072, (hinge,butt) was assigned February 1, 1971 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN. ISO Group has several sources of supply for this NSN.

This part number has not been procured by the US Government in over a year. There have been 3 contracts issued for this part number, with 3 awards given. The US Government has only awarded those contracts to one supplier. The last contract numbers awarded were: SPE7L422P2452, SPE5E721P0746, SPE5E720P2127. The total value of the awarded contracts has been US$ 3,339.09.

This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.

There has been a small amount of demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 22894. [A HINGE USUALLY WITH RECTANGULARLY SHAPED LEAVES. THE DIMENSION PARALLEL TO THE HINGE PIN MUST BE GREATER THAN THE DIMENSION TRANSVERSE TO THE HINGE PIN. IT MAY HAVE A TENSION COIL SPRING AT ITS PIVOT(S) FOR CLOSING ACTION, AND MAY HAVE A THIRD MEMBER BETWEEN ITS PIVOT(S) TO PERMIT THE DOOR, OR THE LIKE, TO SWING IN AN ARC FROM EITHER SIDE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340004826072 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

MATERIAL AND LOCATION
(ANNQ) BRASS, QQ-B-626, COMP 11 PIN AND STEEL, FED STD 66, COMP 302, 303, OR 304 PIN AND STEEL, FED STD 66, AISI OR SAE 1008 THRU 1022 BODY
UNABLE TO DECODE
(ANNQ) UNABLE TO DECODE AND UNABLE TO DECODE AND UNABLE TO DECODE
SURFACE TREATMENT AND LOCATION
(ANNR) CADMIUM, QQ-P-416, TYPE 2, CLASS 2 OVERALL AND ZINC, QQ-Z-325, TYPE 2, CLASS 2 OVERALL
UNABLE TO DECODE
(ANNR) UNABLE TO DECODE AND UNABLE TO DECODE
BODY WIDTH
(ADAT) 2.938 INCHES MINIMUM AND 3.062 INCHES MAXIMUM
HINGE MOUNTING TYPE
(AKER) FULL SURFACE
KNUCKLE TYPE
(AKNB) FRICTION
KNUCKLE QUANTITY
(AKEX) 5
MATERIAL THICKNESS
(ABPX) 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
MATERIAL
(MATT) COPPER ALLOY AND STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 PIN
MATERIAL
(MATT) STEEL COMP 1020 BODY
MOUNTING HOLE DIAMETER
(ABTB) 0.164 INCHES NOMINAL
MOUNTING HOLE QUANTITY
(ABTJ) 6
PERFORMANCE TYPE
(AGLD) NOT RATED
PIN CENTER TO BODY EDGE DISTANCE
(AKFK) 1.438 INCHES MINIMUM AND 1.562 INCHES MAXIMUM
PIN REMOVABILITY
(AKES) NONREMOVABLE
REVERSIBLE FEATURE
(AJNC) NOT INCLUDED
STYLE DESIGNATOR
(STYL) BUTT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) QQ-P-416, TYPE 2, CLASS 2 FED SPEC 1ST TREATMENT RESPONSE AND QQ-Z-325, TYPE 2, CLASS 2 FED SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENT
(SFTT) CADMIUM AND ZINC OVERALL

Manufacturer Part Numbers


Related Inventory

A-A-55587-4
5340-01-193-4588
Clamp
Readily Available
A-A-55587-4
5340 01 193 4588
HINGE, BUTT
Request
MS27968-6
5340 00 482 6072
HINGE,BUTT
Request


 
Top